Alpina Anzana Tocsen Helmet black matt

The ALPINA ANZANA TOCSEN is an enduro helmet with an integrated fall sensor which, in conjunction with the Tocsen app, calls for help when the person who has fallen cannot do it himself. The ALPINA ANZANA TOCSEN enduro helmet has an integrated fall sensor in the Ergo Tocsen run system. The system consisting of fall sensor and app calls for help in the event of an accident when the cyclist who has fallen cannot do it himself. In addition, the Run System guarantees that the helmet sits optimally on the head in case of a fall. With its fine ratcheting, it can be perfectly adjusted to the head. The height of the adjustment system can be adjusted using the integrated Custom Fit System. This results in a secure fit and optimum protection.

The outer shell of the helmet consists of a robust polycarbonate plate, which is thermally bonded to the Hi-EPS using the inmould process. This results in a firm surface connection, from which an additional plus in stability results. Thanks to Made in Germany, a maximum of production quality is ensured at the same time. The equipment list of the ALPINA ANZANA TOCSEN also includes the large shield that protects the viewing area, an antibacterial and washable padding for high comfort and a fly screen in the front ventilation openings.

Tocsen - The fall sensor of the help calls
Cycling alone is nice, but can also be dangerous. This is where Tocsen comes in. The system of fall sensor and app calls for help when the fallen cyclist can no longer do it himself. If the sensor detects a fall, it asks the user whether everything is in order. If there is no response, the app sends an emergency call to emergency contacts and Tocsen users in the vicinity.

Run System Ergo Pro
With the Run System, the size of all Alpina helmets can be individually adjusted using a smooth-running rotating wheel. The two large wing-shaped headrests are a distinctive feature of the high-quality Ergo Pro Run System. They are made of a two-component mix of plastic and rubber. This guarantees maximum comfort. Since 2014, the Run System Ergo Pro has been available in colours to match the helmet.

Y-clip
A helmet can only provide the best possible protection if it remains in the optimum position in the event of a collision. The adjustment and fixing of the two straps under the ear plays a decisive role in this. The Y-clip system guarantees a millimetre-precise adjustment - in seconds.

Ergomatic
Proven a hundred thousand times over and used in all Alpina helmets: the belt buckle with the red push button and multi-stage automatic locking mechanism. Ergomatic can be operated with one hand - uphill you can loosen the strap, downhill you can tighten it - and in the event of a fall the buckle mechanism cannot open by itself.

Edge Protect
Edge Protect is an additional polycarbonate sheet that enhances inmould helmets. It covers edges on the underside of the helmet. This protects the Hi-EPS and increases the durability of the helmet. At the same time, the neck and shoulder area of the rider is protected against injuries caused by the helmet in the event of a collision and in the event of contact with the lower edge of the helmet.

Airflow Vents
One factor that strongly influences the wearing comfort is the ventilation of the helmet. The strategically sensible arrangement of the ventilation openings is decisive for optimum ventilation of the interior. The air is directed into the interior, directed along the head and can flow out again at the rear. The head is thus always pleasantly air-conditioned.

HI-EPS
The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrene). The material has microscopically small air chambers which absorb the forces that act on the helmet during an impact. Hi-EPS provides optimum protection and at the same time allows extra-thin walls and narrow helmet shapes.

inmold
In the Inmold production process, the polycarbonate helmet upper shell is thermally bonded to the Hi-EPS inner shell of the helmet body under high heat and pressure. This creates a large-area and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely stable.

Ceramic Shell
All helmets from Alpina, which are manufactured using the Inmold process, are equipped with a robust ceramic shell. A polycarbonate plate is stretched under strong heat onto the shape of the future helmet and pressed with high pressure onto the Hi-EPS body and thermally bonded to it. The Ceramic Shell is characterised by several qualities: It is break and scratch resistant, UV-stable and antistatic.

Custom Fit
Custom Fit is an adjustment system at the back of the head that allows you to adjust the height of the Run System in several steps. This allows the helmet's optimum fit to be adjusted for a wide range of head shapes. Pressure points are a thing of the past, the helmet fits perfectly and safety is increased.