Alpina Comox Helmet black matt

Safe, light, short shield, crass in style. The COMOX is a variable and comfortable helmet for the trail. For every trail.
The combination of good fit, cool look and a lot of protection is the answer to almost everything. The COMOX is extremely well ventilated, which allows the use in Enduro, Allmountain and Trial. It's up to you. With the Run System Ergo Flex 2, a light and comfortable adjustment system is built into the COMOX. The filigree construction nestles perfectly to the head and thus increases protection. Among bikers there is a saying that there is no bad day on the bike. With the COMOX enduro helmet that's true.

Run System Ergo Flex
With the Run System, the size of all Alpina helmets can be individually adjusted using a smooth-running rotating wheel. The Run System Ergo Flex is Alpina's lightest and most comfortable fitting system. The filigree construction nestles evenly against the head and thus increases protection. The Run System Ergo Flex can be adjusted via a fine grid - there is no more individual, smooth-running and comfortable way to adjust a helmet.

Y-Clip
A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixing of the two straps under the ear plays a decisive role in this. The Y-Clip system guarantees a millimetre-precise adjustment - in seconds.

Airflow Venting
One factor that strongly influences the wearing comfort is the ventilation of the helmet. The strategically sensible arrangement of the air vents is decisive for optimum ventilation of the interior. The air is directed into the interior, directed along the head and can flow out again at the rear. The head is thus always pleasantly air-conditioned.

HI-EPS
The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrene). The material has microscopically small air chambers which absorb the forces that act on the helmet in the event of an impact. Hi-EPS ensures an optimal protection effect and at the same time allows extra-thin wall thicknesses and narrow helmet shapes.

Ceramic Shell
All helmets from Alpina, which are manufactured using the Inmold process, are equipped with a robust Ceramic Shell. A polycarbonate plate is stretched under high heat onto the shape of the future helmet and pressed with high pressure onto the Hi-EPS body and thermally bonded to it. The Ceramic Shell is characterised by several qualities: It is break and scratch resistant, UV-stable and antistatic.