Finish Line Grease Gun
ID: 3725
£31.99
Unfortunately the desired product is currently sold out
Product description
Finish Line Grease Gun
Great for delivering measured amounts of grease where you need it when lubricating pedals, hubs, bottom brackets, headsets, crank bolts, etc.
Compatible with Finish Line's 3.5oz Premium Grease tubes, 2oz Ceramic Grease tubes. Fits most other standard 9/16" threaded tubes of grease. Will not fit 1/2" threaded tubes, such as Phil Wood's 3oz Tube.
Details
- suitable for all 100 ml tubes
- Simple one-hand operation
- Long tip for recessed suspension pivots
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, BMX, Road, Cyclocross, Gravel, Aero, Endurance, Triathlon, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Lubricant
Type:
Grease gun
Operating Range:
Gear hub, ball bearing, Bearing, Pedal, Chain, Cassette, Chain Ring, fork & suspension, Gears, Telescopic seat post
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
3725
Manufacturer article number
G00000101
EAN
0036121170025
Customer opinions
Bärni
tip
Translated from the German
To the original
So that the thing works really well, after the O-ring at the back (see comment below), I also installed a small spring at the front, which presses lightly on the non-return plate.
31.12.2019
Henning
Leakage, should not be sold with manufacturing defects
Translated from the Swedish
To the original
The pump leaks more grease through the pump handle than can be used at the nozzle. Fortunately, I had a suitable sealing ring at home (see Bärni's comment below) and now it works as it should. The absence of the sealing ring should be regarded as a manufacturing defect (the alternative is that the pump has a design defect) and the pump should not be sold before this is rectified.
05.10.2019
Bärni
Leaky
Translated from the German
To the original
Fat came out the back.
Solution: Disassemble the pump, attach an O-ring over the shaft to the rear. Slightly shorten the press cylinder (O-ring thickness).
Now she works.
30.12.2018