Product description
Topeak DeFender Fender Set RC1/RC11 Set black (black)
Super-slim mudguard set for racing bikes.
Details
- angle adjustable
Show all models from the Topeak Defender series
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Road, Cyclocross, Gravel, Endurance
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Set front & rear
Operating Range:
Road
Build:
Mudguard
Suitable wheel sizes:
28''
The delivered product may have been produced earlier than the advertised model year.
Dimensions
fender width front:
83 mm
fender width rear:
58 mm
Front panel protection:
320 mm
Rear fender length:
600 mm
The delivered product may have been produced earlier than the advertised model year.
Material
Material:
nylon injection
The delivered product may have been produced earlier than the advertised model year.
Mount
Bracket front:
Quick release clip on the fork and straps
Rear bracket:
Fastened by velcro straps on top and seatpipe
The delivered product may have been produced earlier than the advertised model year.
Weight
Front:
39 g
Rear:
117 g
The delivered product may have been produced earlier than the advertised model year.
Model Year
2022
The delivered product may have been produced earlier than the advertised model year.
Article number
294437
EAN
4712511830880
Customer opinions
MR
Simply not thought through
Translated from the German
To the original
The fenders are only about 160g heavy. The fenders also look very sleek at the wheel. But then it stops with the Pro's on - the front fastening is very frickelig and nothing for the fast (and frequent) mounting and dismantling. Klett simply does not mind. The eyelets in which the plates are put (the two struts on the front fork) do not hold either. A Schlagloch and you are loose. Behind the same drama: the attachment by means of tape funktiniert, but the mounting and dismantling is frickelig (tape threading) and takes me too long.
31.05.2015
Dennis
Not long
Translated from the German
To the original
The idea I find basically very good. However, broke with me within a short time the fastening at the rear. In the case of the front fastening, the hook and loop fasteners came into the spokes over time.
27.07.2014
wolfgang mack
employee
Translated from the German
To the original
Poor to assemble, do not sit tight. Are also a little narrow .. Would not buy them again ...
01.06.2014