Park Tool CC-2C chain wear checker
ID: 14581
£38.99
Unfortunately the desired product is currently sold out
Product description
Park Tool CC-2C chain wear checker
To avoid deterioration in shifting and premature wear of the drivetrain, most suppliers recommend replacing the chain at a maximum elongation of 1%. You can determine the wear of the chain quickly and precisely with the Park Tool chain tester.
Simply insert the chain tester into two chain links and press the measuring angle as far as it will go. The numbers on the measuring angle now indicate whether the chain is still within the tolerance range or not.
Simply insert the chain tester into two chain links and press the measuring angle as far as it will go. The numbers on the measuring angle now indicate whether the chain is still within the tolerance range or not.
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, Road, Cyclocross, Gravel, Endurance, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Tool Type:
Gauge
Operating Range:
Chain
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
14581
Manufacturer article number
CC-2
EAN
0763477001313
Customer opinions
Matthias
Top for 1x12er chain
Translated from the German
To the original
Very good in application. For chain with 1x12 translation not to imagine, because only with this tool on the market the Verschleissgrenze of 0.5% can be measured.
04.04.2018