Product description
Park Tool CCP-7C Crank Puller
This product’s description has been automatically translated. Please excuse any mistakes.
The universal design of the CWP-7 has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms.
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, Road, Cyclocross, Gravel, Endurance, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Tool Type:
Puller, Bottom Bracket Tool
Operating Range:
Bottom bracket
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
1 Park Tool CCP-7C
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
226501
Manufacturer article number
CWP-7
EAN
0763477001474
Customer opinions
c
CWP-7C
Translated from the German
To the original
Tool was extremely tightly screwed on delivery,
after that it worked fine.
29.03.2021
rdauzun
good tool
Translated from the French
To the original
quality at appointment to remove raceface crankset on trek Fuel ex 5
18.02.2021