Product description
Park Tool BBT-90.3 Bottom bracket tool set
For the installation and removal of bearing shells or press-fit bearing units on BB90, BB92, Shimano Press Fit, SRAM Press Fit GXP, Race Face Press-Fit or other press-fit bottom bracket systems.
The BBT-90.3 includes a bearing removal tool and two bushings, which are used in conjunction with a Park Tool Bearing Press to press the bearings into the bottom bracket shell. The bearing shell is removed with light hammer blows on the tip of the removal tool.
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, Road, Cyclocross, Gravel, Aero, Endurance, Triathlon, Trekking, Bike Travel, Bikepacking, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Tool Type:
Extraction / insertion tool
Operating Range:
Bottom bracket
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
Includes two sets of mounting sleeves for installing the bearing shells in conjunction with an HHP-2 or HHP-3 press-fit tool
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
253747
Manufacturer article number
BBT-90,3
EAN
0763477000644
Customer opinions
Joeri
Easy in use
Translated from the Dutch
To the original
Handy tool to remove bearings
26.04.2018
Joeri
Easy in use
Translated from the Dutch
To the original
Handy tool to remove bearings
26.04.2018