Product description
Busch + Müller Selectra Dynamo Rear Light black/red (black/red)
The Selectra plus is an innovative diode taillight with electronic, maintenance-free parking light function in the entry-level range in reliable B+M quality.
Details
- with a central ultrabright LED
- with one light-emitting diode each directed to the right and left
- with overvoltage protection
- with large area reflector
- with clip and plug-in connections for current and ground
- with 80 mm bolt spacing
- with test mark D (incl. "Z") and E
Show all models from the Busch + Müller Selectra series
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Trekking, Bike Travel, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Commuting, Lifestyle / Single Speed, Urban Sports, Cross
The delivered product may have been produced earlier than the advertised model year.
Main Information
Construction:
Rear Light
features:
Parking Light
The delivered product may have been produced earlier than the advertised model year.
Illuminant
luminary:
LED
luminary details:
Diode rear light
The delivered product may have been produced earlier than the advertised model year.
Mount
Mounting options:
Luggage carrier fitting
The delivered product may have been produced earlier than the advertised model year.
Energy supply
Power Source:
Dynamo
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
4998
Manufacturer article number
320ALK-02
EAN
4006021003156
Customer opinions
Ragnar
finally a very good rear light
Translated from the German
To the original
In our large family I constantly have to repair bicycles. Taillights are now part of the “standard”. So far I've mostly used taillights from AXA because they're available cheaply everywhere. Unfortunately, I had bad experiences with this: The installation of the cable connection was e.g. T. mega-complicated (I had to use a soldering iron once) and the service life was “mediocre”. The rear light shown here looks a bit bulkier, but there are two ways to mount the cable: you can push plugs onto the pins provided for this purpose, provided the old rear light was connected with plugs, or you can "strip off" the wire ends and put the copper wires through Insert a small hole into a device provided for this purpose and then secure it using a slider. Brilliant. I can't say anything about its lifespan yet, but I guess I'll always use this taillight from now on.
28.09.2023
Hans
Good choice
Translated from the German
To the original
Good quality, easy to assemble and connect.
02.06.2022
Uwe
Taillight
Translated from the German
To the original
A sensible rear light, simple and safe.
25.11.2021