Product description
Cube RFR Universal Rack Klick&Go
The RFR universal luggage rack Klick & Go is designed for fixed mounting on the rear frame.
The mounting system is optimised for carrier mounting on cube frames, but universal enough to be used on bikes from other manufacturers as well. The luggage carrier has a classic spring flap, sturdy triangular profile tubes and is optimised for side use of luggage bags without affecting the upper carrying surface. The manufacturer specifies the maximum payload as 25 kg. Thanks to the large adjustment range, the RFR universal luggage carrier can be used on bicycles from 24" to 29" wheel size.
Details
- universal rear rack
- Taillight bracket
- Attachment for luggage carrier bags
- Dimensions (L x W x H): 390 x 200 x 420 mm
- with spring clip
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Trekking, Bike Travel, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Commuting, Lifestyle / Single Speed, Urban Sports, Cross
The delivered product may have been produced earlier than the advertised model year.
Assembly
Assembly:
frame mount
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Fixed instillation
Suitable Wheel Size (in):
24, 26, 28, 29
Material type:
Aluminium
Load Capacity:
25.00 kg
The delivered product may have been produced earlier than the advertised model year.
Functions
features:
With spring flap
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
1 x luggage carrier
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
332520
EAN
4250589403761
Customer opinions
Martin
Mr.
Translated from the Dutch
To the original
Very sturdy luggage carrier. Assembly suitable for different types of bicycle. Assembly was no problem.
16.04.2020
Grei
Stable, but not suitable for all types
Translated from the German
To the original
If you do not have screw eyelets for a baggage tag on the side of the frame (saddle bar), this becomes a bastelwork. Installation of the upper bracket on the screw of the quick-release clamp (saddle tensioner) is only possible with bucking and adaptation of the luggage carrier parts. It simply lacks an adequate alternative fastening aid ..!
13.10.2017
Valentin
Practical gaps
Translated from the German
To the original
Looks good, light, stable. Apparently, the designer has this carrier before he went into series not a single time itself mounted, So the "carrier for cube" went to my cube, I had to file and re-adjust: (((.
27.11.2015