This product’s description has been automatically translated. Please excuse any mistakes.
The Sprint is based on a very special holding and fixing concept and is therefore the optimal solution for the increasing number of aero frames, seat posts with special profiles or other models that cannot be fixed with a conventional clamp or can only be fixed with difficulty. For the Sprint, the bike is placed on a horizontal rail and fixed either to the fork or the rear drop-out with a clamping mechanism. An adapter ensures that quick-release or thru-axle mounts can be clamped in all conceivable dimensions. The frame is additionally supported by placing the inner bearing housing on a special plate. This means that the wheel is in a safe mounting position in no time at all. In addition, the working height can be adjusted over an enormous range from 76 to 121 cm and the horizontal shifting of the fixing points ensures that the wheel is always optimally balanced. In addition, the system can be rotated through 360° so that literally every movement can be carried out in the optimum position. Nevertheless, thanks to its three wide-reaching tripod legs, the Sprint is extremely stable and safe not only on level workshop floors, but also off-road. In general, the Sprint is virtually predestined for outdoor use. Thanks to its manufacture from a very light aluminium alloy, it has a total weight of 5.7 kilograms, which is easy to transport. Folded up, the Sprint is also characterized by its small packing size. It can carry an impressive 38 kilograms on its shoulders and will therefore not bend even with heavy mountain bikes or even e-bikes.
360° rotatable with flexible fork and bottom bracket position
Very light aluminium alloy with protective anodising
Very stable thanks to the 3 tripod legs, even in rough terrain
Small size when folded
Folded Dimensions (cm): 1.270 x 190 x 760 mm
Working Height (cm): 76-121 Stand type: tripod
Scope of Delivery
Content / delivery size: 1 repair stand, adapter for QR holder with 9 x 100/130/135 mm, adapter for thru axles 12 x 142 mm and 15 x 100 mm, 20 x 110 mm, 12 x 100 mm. 12 x 148 mm (boost), 15 x 110 mm (boost)