Product description
FSA 386Evo on BB86 Bottom Bracket 30mm
This product’s description has been automatically translated. Please excuse any mistakes.
This FSA bottom bracket is suitable to use a BB386 crank with 30 mm axle diameter in a Press Fit BB86 frame.
Details
- Case diameter: 41 mm
- Material bearing: steel
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Road, Cyclocross, Gravel, Endurance
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Hollow Axis
Assembly Width:
86 mm
The delivered product may have been produced earlier than the advertised model year.
Axle
Axle Clamp:
30 mm
The delivered product may have been produced earlier than the advertised model year.
Compatibility
Thread:
BB86
The delivered product may have been produced earlier than the advertised model year.
Bottom Bracket
System:
Pressed bearing shells
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
793843
Manufacturer article number
200-0012000110
EAN
4712865857786
Customer opinions
Klaus
Finally found it.
Translated from the German
To the original
After a long search I finally found this bottom bracket at Fahrrad.de. I needed it for the conversion to a Rotor 3d+ crank with Q-Rings, which has a 30 shaft.
The bearing, which I have installed several times, is of good quality and can be assembled and disassembled easily and without any problems. Assuming you have the special tools you need.
So far I haven't had any failures, but I also regularly check for play, dirt and possible damage and carry out cleaning and maintenance work.
28.06.2022
Pascal50
FSA case
Translated from the French
To the original
Box OK, easy to mount with the tool XLC ad'hoc.
Comes with all the washers (which should have been specified on the description).
12.09.2019