Product description
KCNC Jockey Wheel System SUS for Shimano 10S/11S 14+16 teeth black (black)
Jockey wheel system for Shimano 10S / 11S, 14 + 16T with stainless steel bearing made of Aluminium 7075.
Details
- Oversized-Narrow-Wide support wheel 14 + 16 teeth
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Road, Cyclocross, Gravel, Aero, Endurance
The delivered product may have been produced earlier than the advertised model year.
Functions
Suitability:
Rear derailleur
The delivered product may have been produced earlier than the advertised model year.
Compatibility
Compatible with:
Shimano Dura-Ace RD-9000 & Ultegra RD-6800 with short shift cage to max. 28 teeth
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Rear derailleur cage incl. control pulleys
The delivered product may have been produced earlier than the advertised model year.
Material
material details:
Aluminium 7075, stainless steel
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Weight:
67.00 g
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Content / delivery size:
1 x KCNC rear derailleur cage + shift rollers
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
654389
EAN
4710751026049
Customer opinions
Armin
Great part :-)
Translated from the German
To the original
I replaced the original part of the Dura-Ace with the KCNC. Is much quieter than the original. The chain runs more perfectly than ever before. I am very satisfied with it! However, the assembly is a bit tricky and should only be done by mechanically trained people.
07.07.2021
Thomas
Nice item, bad manual
Translated from the Danish
To the original
The item is super, however, missed an assembly instruction. Then it managed in the 3rd attempt before it was mounted correctly (I think probably)
28.01.2021
Wille
KCNC jockey wheel system
Translated from the Swedish
To the original
Lack of assembly instructions may cause incorrect mounting and poor results. It comes with two equalization jockey wheel screws. One of them should be used. The length differs. None of them work unless you remove a tray from the existing "cage" that you replace.
Once through the assembly, the system works perfectly and the switching takes place completely silently on my Ultegra 6700.
19.08.2019