Product description
Lezyne Alloy Floor Drive Tall Floor Pump silver (silver)
Sporting a CNC-machined aluminum barrel and base with an anodized, high-polish finish, the Alloy Floor Drive is sure to make a statement in your garage. Finished off with a gorgeous wood and aluminum handle, the pump features the extremely accurate and easy-to-read, oversized 3.5-inch precision gauge. An extra-long high-strength hose with aluminum couplers terminates with the signature ABS-1 Pro chuck.
Details
- analogue 3.5 inch pressure display
- Extra long, high-strength hose
- robust, anodized finish
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Dirt, Road, Cyclocross, Gravel, Endurance, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Floor pump
Head:
ABS-1 PRO Chuck valve cap
Compatible Valves:
Car valve, French valve
Maximal Pressure:
15.00 bar
Pressure Gauge:
yes
The delivered product may have been produced earlier than the advertised model year.
Material
Handle:
Wood
Cylinder:
Aluminium
Foot:
Aluminium
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Weight:
1,600.00 g
Height (mm):
665.00 mm
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
including Speed Chuck Ball Adapter, Bladder Adapter
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
663654
Manufacturer article number
1-FP-AFLDR-V5T06
EAN
4712805991310
Customer opinions
Düse
Lezyne Alu Floor Drive
Translated from the German
To the original
Just over two years ago, I bought this sinister Lezyne Alu Floor Drive in the hope of having invested "once in a while". Now it was leaking in the area of the manometer.
Because of the dealer's lack of warranty over time, I researched the cause of the leak and found that the membrane had rusted after opening the pressure cell. The fact that it creates condensation is physically predetermined. With such a high-quality (expensive!) Pump this must not lead to the failure in this time, particularly since that always occurs again! There is a spare part for it but you have to be prepared every 2-3 years to buy a new pressure gauge - or a new pump. For this reason, no recommendation!
01.04.2019
frederic
maintaining the mouthpiece?
Translated from the French
To the original
the pipe length is too short about 6cm. The tip can not be fixed as shown in the photo at the base of the pump body. The pipe can therefore walk all the time which is annoying storage. Is it for that a clip is sent with? It makes it possible to fix the pipe so that it does not stroll anymore. With that, it's ok
06.05.2018