Product description
Marwi GH-080 Derailleur Hanger M4x0,7
Derailleur hanger GH-080 compatible with Bergamont, BH, BMC, Bulls, Canyon, Carrera, Carver, Corratec, De Rosa, Decathlon, Diamondback, Focus, Fuji, Ghost, Gitane, GT, Haibike, Hercules, KHS, Koga, Koga-Miyata, Kuota, Marin, MBK, Müsing, Principia, Raleigh, Ridley, Rocky Mountain, Schwinn, Sinus, Staiger, Steppenwolf, Stevens, Storck, Winora bikes and various manufacturer.
Details
- Screw set: M4 x 0.7
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Road, Cyclocross, Gravel, Endurance, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting
The delivered product may have been produced earlier than the advertised model year.
Functions
Suitability:
Rear derailleur
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Rear derailleur hanger
The delivered product may have been produced earlier than the advertised model year.
Compatibility
Compatible with:
Universally applicable
The delivered product may have been produced earlier than the advertised model year.
Material
material details:
Aluminium
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Height (mm):
53.50 mm
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
908778
Manufacturer article number
439080
EAN
8590966390809
Customer opinions
Jan
Not well thought out!
Translated from the German
To the original
I don't know if that's the case with every bike, but with my bike it's the case that the screws have to be fastened from the derailleur hanger side.
Stupid only if there are no sinks for the countersunk screws in the derailleur hanger. So I had to mill the sink in manually so that the screw heads are level with the derailleur hanger surface on which the nut of the thru axle also rests.
Next annoyance: The thread in the derailleur hanger, if this does not match the thread in the frame, then it leads to a gap between the frame and the derailleur hanger. So I couldn't set the last gear in the rear derailleur. Take everything apart again and drill out the threads from the derailleur hanger.
OMG everything is fine now! But not affordable for the money.
22.07.2022
Peter Schmid
Marwi GH-080 derailleur hanger
Translated from the German
To the original
Fits like a glove.
23.04.2020