Product description
milKit Tubeless Sealant 500ml
Details
- Leaves no rubber residues (rubber balls)
- Repairs slots and holes up to 6 mm
- Synthetic latex: No ammonia, no bad smell, no damaged tyres and rims. Non-allergenic and safe
- Works from -20 to +50° C
- Sealant quantities recommended by MilKit: Road/gravel 30-50 ml / 26" MTB 60-80 ml / 27.5" MTB 80-100 ml / 29" MTB 100-120 ml
Special Features
Test victory Mountain Bike Magazine 12/2020 - Milkkit
milKit sealing milk has achieved a convincing test victory in the big comparison test of the current MOUNTAINBIKE magazine. In the extremely renowned field of participants, the milKit sealing milk convinced with outstanding performance and was able to prevail against the seven competitors. With 96 points, a more than deserved test victory.
The conclusion of the MOUNTAINBIKE editorial team:
"Tough milk with lots of particles. Spreads perfectly in the tyre, impeccable sealing. Can be diluted with water if necessary."
Test result: Outstanding (96 points)
The conclusion of the MOUNTAINBIKE editorial team:
"Tough milk with lots of particles. Spreads perfectly in the tyre, impeccable sealing. Can be diluted with water if necessary."
Test result: Outstanding (96 points)
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, Road, Cyclocross, Gravel, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Endurance
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Tyre Sealant
The delivered product may have been produced earlier than the advertised model year.
Model Year
2022
The delivered product may have been produced earlier than the advertised model year.
Article number
1140338
EAN
7640174460335
Customer opinions
Roland
Milkit tubeless sealant
Translated from the German
To the original
Milkit is the test winner at Mountanbike magazine. So far I have always used stan's no tube. But I have to say that I like Milkit better. It contains no ammonia and the opened bottle does not clump. Milkit can be diluted with water up to 40%. Otherwise, the tubeless filling works as usual. The tire is reliably sealed. I see the greatest advantage over agents containing ammonia in the fact that the rim can be cleaned more easily when changing a tire. Highly Recommended!!
02.06.2022
Roland
Milkit tubeless sealant
Translated from the German
To the original
The Milkit tubeless sealant is the test winner at the magazine Mountanbike. I've used stan's no tube sealant so far. But I have to say I like the Milkit sealant better. Firstly, it contains no ammonia and unlike stan's no tube, the contents of the bottle do not clump together! Milkit can be diluted with up to 40% water to make it thinner. So far I haven't had any problems with Milkit
02.06.2022
Armin
keeps tight
Translated from the German
To the original
Good sealant with very high and good puncture protection
27.01.2022