Product description
Pro Stor Solo Rack II
To hang a wheel on the wall or ceiling. Made of robust 4 mm steel with epoxy coating as well as a paint-protecting coated holder to protect the wheel. Due to the V-shaped recess, the wheel can be suspended with a lock to prevent theft.
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, Road, Cyclocross, Gravel, Endurance, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Wall mount
Suitable for:
1 bicycle
Carying capacity:
25.00 kg
The delivered product may have been produced earlier than the advertised model year.
Material
Material:
Steel
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
4971
EAN
4018861010904
Customer opinions
Andy
The second impression
Translated from the German
To the original
At first I was thrilled. Meanwhile, it has been found that the rubber protection on the hook, due to the underlying sharp-edged iron / sheet, is quickly blown through. This, in turn, ruins effortlessly the most beautiful rims ...! So you have to put your hand on the hook and use the appropriate adhesive tape.
19.05.2015
Pablo
Solid hook
Translated from the Dutch
To the original
Neat wall hook to hang your bike on.
Only downside I find the screws, these are slotted screws. Rather I saw here Phillips.
an excellent product for the rest.
10.06.2014
thehothatkat
Good and cheap bracket, included screws but cruel
Translated from the German
To the original
I bought 2 brackets and hung up in the basement. In my case 2 very heavy bikes depend on it, so far also very good.
The mounting and assembly is very simple, but the included screws in my opinion not to use. There are dowels and matching slotted screws included, but these must sit very tightly and I have constantly slipped out of the screw and have worn it so that I could not put it any more. Cross screws are much better suited for this. After all, you have to work with a little force to keep them safe. After all, regular cycling is a heavy load.
10.06.2013