Red Cycling Products Derailleur Hanger Alignment Gauge
ID: 1394016
£25.99
- 55 %
Unfortunately the desired product is currently sold out
Product description
Red Cycling Products Derailleur Hanger Alignment Gauge
Red Cycling Products measuring and straightening tool for derailleur hangers - get everything back on track again
If you're having shifting problems, it's possible your derailleur hanger was previously bent due to a fall or during transport.
With this measuring and adjusting tool from Red Cycling Products, you can determine exactly whether and to what extent the derailleur hanger is bent and accurately readjust it. This eliminates guesswork when setting up the shifting and means you'll be able to shift precisely again.
At a glance
Material
10636
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, Road, Cyclocross, Gravel, Endurance, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting
The delivered product may have been produced earlier than the advertised model year.
Main Information
Tool Type:
Aligning tool
Operating Range:
Derailleur hanger
The delivered product may have been produced earlier than the advertised model year.
Material
Material:
10636
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
1394016
EAN
4052406329342
Customer opinions
Ernst
Cheap and Precise
Translated from the Dutch
To the original
Good price / quality ratio compared to the other well-known brands, which are much more expensive.
The aforementioned play on the shaft can easily be remedied by screwing in the 2mm Allen screw slightly, until the play is no longer noticeable and the shaft can still rotate smoothly.
Recommended.......
29.04.2023
Thomas
Brings clarity
Translated from the German
To the original
The tool is perfectly adequate for my purposes as a hobby screwdriver. The play in the guide is just 2 mm at the measuring point on a 29" wheel. I have not regretted the purchase.
23.12.2022
Tom
*Good and cheap*
Translated from the German
To the original
Tool for the hobby screwdriver is completely sufficient. really well made for the price.
26.04.2022