Reverse Angle Spacer for Tapered Forks
ID: 1105769
£20.99
Unfortunately the desired product is currently sold out
Product description
Reverse Angle Spacer for Tapered Forks
The 0.5° Angle-Spacer allows you to fine tune your bikes’ geometry, making it half a degree slacker. Got a bike with a 65° but want to make it 64.5°? Now you can! Perfect to make your bike more capable on those gnarly descents. The spacer sits neatly between the fork crown and headset on your Tapered Fork and fits with 45° headset bearings!
At a glance
Weight
19.00 g
Material
Aluminium
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
All Mountain / Enduro, Downhill / Freeride, All Mountain / Trail, Enduro
The delivered product may have been produced earlier than the advertised model year.
Accessories
Accessory Type:
Spacer
The delivered product may have been produced earlier than the advertised model year.
Main Information
Suitable For:
Headsets with 45° ball bearings
The delivered product may have been produced earlier than the advertised model year.
Material
Material:
Aluminium
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Weight:
19.00 g
The delivered product may have been produced earlier than the advertised model year.
Assembly
Assembly:
Is mounted between the fork crown and the headset of a tapered fork
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
1105769
EAN
4717480167944
Video
Customer opinions
Markus
works, inexpensive, recommended
Translated from the German
To the original
Good thing! The effect is of course not huge, but just enough to make you feel the difference when driving. In concrete terms, this means more reserves in steep downhill passages.
09.08.2021
Markus
works, inexpensive, recommended
Translated from the German
To the original
Good thing! The effect is of course not huge, but just enough that you can feel the difference while driving. In steep downhill passages you get the impression of a little more reserves.
09.08.2021
John
Works well, nicely machined
used it on trek remedy 8, to get rid of the knock block,
if your using a marzorcchi fork, you'll still need to file or shave down the compression adjuster and air cap, at the top of the fork crown - in order to do bar spins
03.05.2021