Cube RFR Pro Stem Ø25,4mm 35° glossy black´n´grey
ID: 385157
£31.99
Unfortunately the desired product is currently sold out
Product description
Cube RFR Pro Stem Ø25,4mm 35° glossy black´n´grey (glossy black´n´grey)
The RFR stem PRO is made of 3D forged aluminium. The EN standard tested stem guarantees the rider maximum safety in the cockpit. The stem clamp is attached with four screws and connects the stem to the handlebar.
Details
- 3D forged aluminum
- With 4-way handlebar clamp
- 35° angle for comfortable drivers
At a glance
Handlebar Clamp (mm)
25,4
Material type
Aluminium
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Trekking, Bike Travel, All-round / Beginner, Tour / Cross Country, Cross
The delivered product may have been produced earlier than the advertised model year.
Stem
System:
Ahead
The delivered product may have been produced earlier than the advertised model year.
Main Information
Material type:
Aluminium
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Handlebar Clamp (mm):
25,4
Fork Tube Diameter:
1 1/8"
Angle (in °):
+ 35 °
The delivered product may have been produced earlier than the advertised model year.
Technical details
Angle Range + (in °):
35
Angle Range - (in °):
35
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
385157
EAN
4250589432037
Customer opinions
Dossou maxime
It's good
Translated from the French
To the original
Good quality, good workmanship
04.03.2021
Wolfgang
Cube RFR Pro stem 25.4
Translated from the German
To the original
Bike de. is fast and delivers TOP goods!
The Cube stem has a significantly better quality than comparable cheap goods from China! Everything worked very cleanly!
Super light 115 grams (reweighed).
The 35 degrees are justifiable with a shaft length of only 50 mm (center-center) and hardly influence the driving characteristics at all! However, the 50 mm is only correct if you measure the slope along M-M. Measured on the scales, it is "only" 40 mm.
15.02.2021