Product description
RockShox Suspension Pump/Mini-Pump for BoXXer
With the suspension fork pump Boxxer from RockShox you can easily adjust the pressure of air suspension forks and shocks. You can also use it to inflate your tyre. An additional pump is therefore no longer necessary. You can build up to a maximum of 20 bar of pressure and read it easily on the pressure gauge. This can be simply twisted off the pump body and stowed away.
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, Dirt / BMX, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Fork / Damping Pump
Compatible Valves:
Car valve
Maximal Pressure:
20.00 bar
Pressure Gauge:
yes
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Weight:
313.00 g
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
1 x pump for Rock Shox Boxxer fork
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
319240
Manufacturer article number
00.4315.023.020
EAN
0710845666513
Customer opinions
Benjamin W.
Excellent, but a little annoying
Translated from the Danish
To the original
The pump itself is excellent quality. Especially the pressure gauge works accurate and of high quality. The same applies to the pump casing, mm. My subordinates of appeal goes on pipe and valve coupling. The slain there is nothing wrong with, but the way it is set on the pump housing to work in practice poorly. Defeated on the side of the pump housing and can rotate up-down. But the defeated can not rotate. This is a problem when one (with rotation), the screw-coupling "on" - and particularly "by" fork valve. The pressure from the fork presses ventilkoblingens rotation rent together, then struck starts to swerve. Furthermore, cast a little air out when the valve coupling must be removed again. ÆV, for it makes it hard to get a precise number of PSI in the fork. But otherwise really nice. As I said nothing to put on quality overall. With practice and experience will pump probably my dearest possession. It just is not foolproof.
28.10.2016