Product description
SCHWALBE Easy Fit Refill Bottle Fitting Lubricant
Special mounting fluid for bicycle tyres in a refill pack.
Simply apply the fluid to the tyre bead. When inflated, the tyre bead then slides easily into the correct position on the rim. After approx. 10 minutes, the liquid will evaporate completely!
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, Road, Cyclocross, Gravel, Endurance, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Tyre mounting
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
volume:
1000 ml
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
5944
Customer opinions
Bernd
Super Aids
Translated from the German
To the original
Only with this assembly fluid I was able to pull the new balloon tires, 60s wide, evenly, without a tread and quickly. This part I take since then on each longer tour with, because without is nothing at Breitreifen.
30.01.2014
pascal
Fluid for tire mounting assistance
Translated from the German
To the original
Simplifies the installation of wire strips very much!
23.03.2013
Samuel Nicolas
Very convenient ... but
Translated from the French
To the original
Very convenient but a bit pricey. You can see immediately or there are leaks on the side of the tire. A little expensive considering the limited amount of product that incites to use it sparingly.
Does not leave any traces on the side of the tire.
22.08.2012