Product description
Shimano Dura-Ace OT-RS900 Shift Cable Outer Cover 240mm 10 Pieces black (black)
This product’s description has been automatically translated. Please excuse any mistakes.
The radius of the curved cable, which is laid to the rear derailleur (RD-R9100), becomes smaller compared to the radius produced with other rear derailleurs. The OT-SP41 outer cover used at häufig is too stiff for such a small radius, causing technical problems in the cable adjusting screw and hindering quick installation and removal of the rear wheel. By using the OT-RS900 such problems can be avoided, because the OT-RS900 has a smaller Steifigkeit. OT-RS900 should only be used on the rear derailleur side. It should not be used on the shifter/brake handle side.
The length of the OT-RS900 should be adjusted according to the bicycle frame size. This is necessary for optimum performance. The OT-RS900 should be cut through from the correct side when adjusting the length. One of the two ends is flammbehandelt. This flammbehandelte end is inserted into the derailleur/ derailleur adjustment screw and should therefore remain there.
Details
- special outer shell for the narrow radius of Dura Ace RD-R9100 rear derailleurs
- lower stiffness than OT-SP41 outer shell