Shimano SM-BB800 Bottom Bracket Press Fit Hollowtech II
ID: 464767
£29.99
Unfortunately the desired product is currently sold out
Product description
Shimano SM-BB800 Bottom Bracket Press Fit Hollowtech II
Shimano XT SM-BB800 Press-Fit Bottom Bracket
Your bike's performance depends on the cranks and bottom bracket. For a clean run, a good power transmission and a high load capacity, the suitable selection of a suitable crankset is of decisive importance. With the SM-BB800 Press Fit bottom bracket from the XT series you get more stiffness of the crank-inner bearing combination and thus increase the service life of the bearings. Shimano's proven quality continues here - and all this with a very low weight.
The Press-Fit bottom bracket is designed for use in 41 mm PressFit bottom bracket housings and is compatible with Deore, LX, SLX, XT and Hone Hollowtech II cranks.
Details
- Function: Adapter for Press Fit bottom bracket
At a glance
Thread
BB92
Axle Clamp
24 mm
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Marathon / Cross Country, All Mountain / Enduro, Road, Gravel, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Endurance
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Hollow Axis
The delivered product may have been produced earlier than the advertised model year.
Bottom Bracket
System:
Pressed bearing shells
The delivered product may have been produced earlier than the advertised model year.
Compatibility
Thread:
BB92
The delivered product may have been produced earlier than the advertised model year.
Axle
Axle Clamp:
24 mm
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
464767
Manufacturer article number
I-BBMT800PA
EAN
4524667919964
Customer opinions
