Product description
SKS Edge AL Mudguard Set 28" 56mm black (black)
Mudguard in pure form
The EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminium mudguard is closed to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame.
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Trekking, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Commuting, Lifestyle / Single Speed, Urban Sports, Cross
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Set front & rear
Operating Range:
City/Touring
Build:
mudguard for fixed mounting
Suitable wheel sizes:
28''
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Profile Width Front (max.):
50 mm
Profile Width Rear (max.):
50 mm
Front panel protection:
740 mm
Rear fender length:
1200 mm
The delivered product may have been produced earlier than the advertised model year.
Material
Material:
Aluminium
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
Edge AL mudguard set incl. fixing material
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
901635
EAN
4002556903688
Customer opinions
Andreas
Can't do without tinkering
Translated from the German
To the original
I've had enough of my ex-factory plastic mudguards on my VSF T100 for a long time, it was always rattling somewhere. This is not the case with the Edge AL. Good quality, elegant look, good installation instructions. Sufficient screws for attachment included; if need be, you still have the old ones. I had to shorten the struts for the rear fender by 1.5 cm (and they are actually still too long), the sliding bridge had to come out again because the rear wheel was rubbing against it and was replaced with a clean 5mm hole. So you should have a hacksaw and a drill ready. But I expected that. As a hobby mechanic, you have to calculate an hour of installation time because the front and rear wheels have to be removed for installation.
31.07.2022
John
Works well
Translated from the Swedish
To the original
Bought these for my Orbea Carpe 40 as these are the same variant that Orbea themselves use on the Carpe 10. A bit tricky to get the front fender in as they are made to be mounted on the outside of the fork. But it went well despite this.
If you are going to use for Carpe 20/40, you need to purchase an M6x80 bolt with two washers as the hole under the head tube is not threaded. They can probably also be used for the Orbea Vector.
14.05.2022
Mikko
Edge AL Fender Kit 28 "56mm, black
Translated from the Finnish
To the original
Perfect fit for the Merida Crossway 900
28.01.2022