Product description
TOKEN TF24 Bottom Bracket Set BB86/BB92/BB30/PF30 / Shimano 24mm
TOKEN’s NINJA bottom bracket solves the creaking issues, improves bearing life and adds stiffness to the bottom bracket.
Details
- Elaborate plastic, fibre and aluminium combination
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Road, Cyclocross, Gravel, Aero, Endurance
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Hollow Axis
The delivered product may have been produced earlier than the advertised model year.
Bottom Bracket
System:
Pressed bearing shells
The delivered product may have been produced earlier than the advertised model year.
Compatibility
Thread:
BB86, BB30, PF30, BB92
The delivered product may have been produced earlier than the advertised model year.
Axle
Axle Clamp:
24 mm
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
685292
Manufacturer article number
Token TF24/2-BKTK
EAN
4712089718504
Customer opinions
Christoph
Great part - great simplification
Translated from the German
To the original
I ordered this bottom bracket because I wanted to save on expensive tools. It remains to be seen whether I have actually saved anything.
What is definitely the case is that it has made servicing my bike easier. No more loud hammering when you want to change the bottom bracket. Anyway, I don't understand the advantage of pressfit on the bike, especially not on the MTB.
The disassembly of the old Shimano bearing was associated with loud hammering, but it came out of the steel frame without any problems. Then the bearing housing is cleaned and properly greased (also to protect the steel against corrosion), the bearing surfaces and the thread of the token are greased and then into the frame. With the assembly tool that is included, the bearing went in in no time. Even easier than a ThreadedBB because you only have to screw once and in the regular direction.
Then put the RaceFace crank back in and you're done. The crank now turns even more easily than before.
Compatibility top, assembly top. Now the other bike is also being converted.
I highly recommend it. And anyone who knows Hambini knows anyway that the threads together BBs are the best.
10.02.2022
Tobias
Useless bearings and seals
Translated from the Swedish
To the original
The product is very easy to install and feels very solid, but they held a round in Scanian winter then they were rusted and destroyed.
Although I did not wash with a hose or high pressure, water had entered the layers that does not seem to have that much fat in it.
After 3 rounds, it sounds like several years old layers where there is no fat left.
The product may be suitable for sunshine rounds on lvg but not for MTB or gravel.
01.02.2022
Jorn
Installation
Translated from the Dutch
To the original
I had a cracking bottom bracket, that's why I ordered this one for now, I don't have any cracks anymore. The installation went very smoothly thanks to the supplied pieces.
27.01.2022