Product description
Truvativ Pressfit 30 Bottom Bracket Nylon black (black)
The bearings of the SRAM PressFit 30 bottom bracket are located in nylon shells which are pressed into the bottom bracket housing of the frame. The PressFit 30 has a pre-mounted seal in the shells to extend bearing life and designed for 30mm diameter bottom bracket shafts. The bottom bracket frame must have an inner diameter of 46 mm to use this system.
Details
- Extended Pressfit 30 bottom bracket. to cover a larger bandwidth
- Plastic bearing shells
- Suitable for BB30. Pressfit 30 68/73mm and BB386
- Housing width: 68-92 mm
- Case diameter: 46 mm
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Hollow Axis
The delivered product may have been produced earlier than the advertised model year.
Bottom Bracket
System:
Pressed bearing shells
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Weight:
94.00 g
The delivered product may have been produced earlier than the advertised model year.
Compatibility
Thread:
BB30
The delivered product may have been produced earlier than the advertised model year.
Axle
Axle Clamp:
30 mm
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
644945
Manufacturer article number
00.6418.009.000
EAN
0710845792625