Product description
tubolito Tubo-MTB-27.5 Tube
Light weight and robust:
With 27,5" Tubo-MTB tube you can save more than 100g at your wheel compared to a standard butyl rubber tube. Packaging size is reduced to approximately half of a standard tube, the puncture resistance is doubled, which gives you maximum breakdown protection. Mounting is as easy as with a standard tube, this product gives you an excellent alternative to tubeless solution.
Special Features
valve type
Which valve you need depends on the size of the valve hole in your rim.
There are three different types of valves:
AV - Schrader valve (also called car valve) - 8.5 mm rim hole
DV - Dunlop valve (also called Blitz valve) - 8.5 mm rim hole
SV - Presta valve (also called Sklaverand or French valve) - 6.5 mm rim hole
There are three different types of valves:
AV - Schrader valve (also called car valve) - 8.5 mm rim hole
DV - Dunlop valve (also called Blitz valve) - 8.5 mm rim hole
SV - Presta valve (also called Sklaverand or French valve) - 6.5 mm rim hole
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro
The delivered product may have been produced earlier than the advertised model year.
Main Information
Wheel Size:
27.5 inches
Scope of delivery (quantity):
1 pieces
The delivered product may have been produced earlier than the advertised model year.
Tube
suitable for tyre size inch (Diam. x Width):
27,5 x 1,8 - 2,4
Valve Type:
French Valve
Valve Length:
42 mm
Material:
Thermoplastic
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Weight:
82.00 g
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
708551
EAN
9120077570020
Customer opinions
Alfred g
There's nothing to moan about
Translated from the German
To the original
Contrary to some postings that complain of air loss, my experience is generally positive: After a breakdown with my tubeless coat I switched to the turbolito. The previously necessary removal of the hardened sealant milk resulted in a lump that has surpassed the weight of the tube safely! That was a real surprise for me!
In the case of the hose I was unable to detect any loss of air (observation period: 3 weeks).
Conclusion - tubeless OK - but before a new season out and refill sealant OR use turbolito.
31.08.2019