Product description
XLC KS-C04 Rear Stand 26-28" black (black)
This stable side stand is mounted directly on the chain stay with a 18 mm adaptation base. Due to its adjustability, the stand fits wheels from 26 to 28 inches. An extra large rubber foot ensures a secure stand.
Technology
Adjustable Length
Due to individual adjustment possibilities, these stands can be used for different wheel and frame sizes. Sawing to shorten the leg is no longer necessary.
Technology
Adjustable Length
Due to individual adjustment possibilities, these stands can be used for different wheel and frame sizes. Sawing to shorten the leg is no longer necessary.
Details
- Extra large rubber feet for secure standing
- Mounting on the chain stay with an 18 mm adaptation base
- Includes m5 screws
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Trekking, Bike Travel, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Everyday Cycling, Commuting, Lifestyle / Single Speed, Urban Sports, Cross
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Rear stand
Material type:
Aluminium
Suitable wheel sizes:
26'', 27.5'', 28''
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Length Adjustable:
yes
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
373523
EAN
4032191789262
Customer opinions
M
Mounting only possible by drilling the frame
Translated from the German
To the original
Absolute bad buy! Supplied with only 2 screws, assembly would only be possible by drilling a hole in the frame! What bikes have pre-drilled mounts at this point?!?!?
01.02.2023
alpineangel72
Good stand, difficult to fit with fixings supplied
Translated from the French
To the original
Worth noting that the M5 screws were not long enough and do not include nuts. This meant for a Haibike Sduro we had to find shorter screws and nuts to fit. Once fitted, nice stand. At least I’ll have no excuse for throwing my bike on the floor, other than a tantrum!
24.09.2020
Nerdy
Excellent but not readily compatible with Haibike full suspension bikes
Translated from the Norwegian
To the original
Excellent build quality, light weight and looks nice on bike!
The kickstand comes with 2 x 25 mm long M5 screws without nuts, not mentioned in description.
To mount on full suspension Haibike the 18 mm apart holes need to be widened (Dremel / drill) to accommodate M6 screws (30 mm long) needed for mounting on Haibikes.
25.06.2020