DT Swiss M 1900 Spline Rear Wheel 27.5" Disc CL 30mm 12x148mm TA SRAM XDR

The M 1900 SPLINE wheels have it all and were developed for the requirements of the new all-mountain bikes. The high-quality, milled hubs of the M 1900 SPLINE incorporate the entire hub know-how of DT Swiss. Forces from and to the hubs are transmitted via the proven Straightpull spokes. The rims, which are as light as they are stable, come in 25, 30 or 35 mm rim widths and offer the best tyre support for your preferred tyre width and can withstand everything that a tubeless set-up and modern MTB tyres can throw at them: Riding up hills fast and down them just as fast.

Tubeless Technology
Tubeless tyres offer some decisive advantages over the conventional combination of tyre and tube: The tyre can be driven with less pressure without risking snakebites and offers more grip. The lower pressure also increases ride comfort. The absence of the tube means that there is no friction between the tube and the tyre and therefore less rolling resistance when driving off-road and over obstacles. If tubeless milk is also used, the tyre is also immune to punctures and small cuts. A big advantage for all those who like to travel long distances and away from the nearest bike shop.
Tubeless Ready rims from DT Swiss have further advantages over conventional rims. Thanks to the design of their cross-section, the tyre simply pops into place when inflated, so that usually only a normal stand pump is needed. The ingenious profile of the DT Swiss rims also ensures a precise and secure fit for the tyre, even under tough driving conditions.

RATCHET SYSTEM Technology
The patented freewheel system with high-precision toothed pulleys guarantees maximum load capacity and reliability. Thanks to the no-tool concept, the system is very easy and quick to maintain.

PRO LOCK Technology
In the Pro Lock process, a patented two-component adhesive is injected into the nipple thread, allowing the construction of extremely durable impellers. As soon as the nipples are screwed in, the adhesive is activated and cures completely at room temperature after approx. 6 - 7 hours. Repeated re-centering is possible without problems, whereby the adhesive strength decreases slightly with each re-centering.