Product description
Rotor BB30/24 Bottom Bracket MTB 68/73mm steel
Rotor 3024 bottom bracket bearing with industrial bearings and non-contact labyrinth seal for MTB. This ensures optimum protection against dust, water and dirt, while at the same time ensuring the smoothest possible operation. Compatible with all Rotor, SRAM and other cranks with 24 mm axles. For MTB frames with the standard BB30, a housing width of 68-73 mm and an inner diameter of 42 mm.
Details
- BB30 to BB24 converter. which allows the installation of conventional BB24 cranksets in BB30 frames
- New plastic caps provide significantly improved lateral compression and resistance to deformation, enabling crisp shifting
At a glance
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Hollow Axis
Assembly Width:
73 mm
The delivered product may have been produced earlier than the advertised model year.
Axle
Axle Clamp:
24 mm
The delivered product may have been produced earlier than the advertised model year.
Compatibility
Thread:
BB30
The delivered product may have been produced earlier than the advertised model year.
Bottom Bracket
System:
Pressed bearing shells
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Weight:
125 g
The delivered product may have been produced earlier than the advertised model year.
Model Year
2022
The delivered product may have been produced earlier than the advertised model year.
Article number
344061
Manufacturer article number
ROBBM3024B
EAN
8434366003269
Customer opinions
F
100%
Translated from the Swedish
To the original
Will never use layers of pressfit model again. This layer, which is the combined variant with threaded center part, is superbly good.
21.03.2019