Product description
Shimano TL-BH62 Disc Brake Line Cutter For brake cables
The TL-BH62 enables clean cutting of the hydraulic line for Shimano disc brakes and the introduction of connecting inserts. The fixation of the cable can be adjusted.
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, Road, Cyclocross, Gravel, Endurance, Triathlon, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, First Rides, Independent Riding, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Tool Type:
Tongs / cutters / drills, Cutting guide
Operating Range:
Brake, Cable Routing
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
Cutting tool including spare blade
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
826434
EAN
4524667937708
Customer opinions
Michael
Perfect
Translated from the Swedish
To the original
Works like a charm if you know what you're doing. Adjust the hose clamp and keep oil away from the tool.
16.03.2023
Johann
Well not that mature
Translated from the German
To the original
Well, as shown in the video on YouTube, it really isn't.
Had to use a hot air gun to make the hose more elastic so that I could even press in the seal. Then it didn't even lift properly in the press-in bolt and kept flying out, and once it held up it was crooked inside. Was a time consuming and annoying fiddling. And without warming it up with the hair dryer, it constantly pushed my hose away. A letdown for me.
23.06.2022