Product description
Trickstuff Presswurst Bearing Tool
The pressing in and out of damper plain bearings and assembly bushings is a tiresome subject for many mountain bikers.
One experiments with various nuts from the ratchet box, looks for suitable washers, and has afterwards nevertheless a messed up plain bearing and scratched dampers. No more - the Trickstuff Presswurst is here.
The sausage ensures that both mounting bushes (these are the aluminium bushes which are in direct contact with the screw) and plain bearings (these are the bearing bushes which are pressed into the damper) can be pressed in and out without other special tools.
Details
- Only a 5 mm hexagon socket wrench required
- For all mounting bushes with continuous 12.7 mm outside diameter and 8 mm inside diameter up to 50 mm width
- For all plain bearings with 12.7 mm inner and 15 mm outer diameter
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro
The delivered product may have been produced earlier than the advertised model year.
Main Information
Tool Type:
Press in / out tool
Operating Range:
Shock
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
Sleeve, pin, screws in 3 lengths, washer, storage box
The delivered product may have been produced earlier than the advertised model year.
Model Year
2022
The delivered product may have been produced earlier than the advertised model year.
Article number
953505
EAN
4251189802077