DT Swiss H 1900 Spline Rear Wheel 27.5" Disc 6-Bolt 30mm 12x148mm TA Shimano 12SP Steel

When muscle power and motor power come together, the action radius of a mountain bike increases exponentially. The H 1900 SPLINE was developed precisely for this. Thanks to the reliability of Swiss precision hubs, stable spokes and durable and lightweight rims, it is ready for any adventure. The motto is to experience how far the symbiosis of man and machine can take you. But there's no need to worry: like all DT SWISS products, the test riders also pushed the H 1900 SPLINE to the limit in the notoriously wild and steep Swiss Jura. So that its reliability is beyond reproach when you install it in your bike and of course also because it is simply fun.

Tubeless Technology
Tubeless tyres offer some decisive advantages over the conventional combination of tyre and tube: The tyre can be driven with less pressure without risking snakebites and offers more grip. The lower pressure also increases ride comfort. The absence of the tube means that there is no friction between the tube and the tyre and therefore less rolling resistance when driving off-road and over obstacles. If tubeless milk is also used, the tyre is also immune to punctures and small cuts. A big advantage for all those who like to travel long distances and away from the nearest bike shop.
Tubeless Ready rims from DT Swiss have further advantages over conventional rims. Thanks to the design of their cross-section, the tyre simply pops into place when inflated, so that usually only a normal stand pump is needed. The ingenious profile of the DT Swiss rims also ensures a precise and secure fit for the tyre, even under tough driving conditions.

RATCHET SYSTEM Technology
The patented freewheel system with high-precision toothed pulleys guarantees maximum load capacity and reliability. Thanks to the no-tool concept, the system is very easy and quick to maintain.

PRO LOCK Technology
In the Pro Lock process, a patented two-component adhesive is injected into the nipple thread, allowing the construction of extremely durable impellers. As soon as the nipples are screwed in, the adhesive is activated and cures completely at room temperature after approx. 6 - 7 hours. Repeated re-centering is possible without problems, whereby the adhesive strength decreases slightly with each re-centering.