Finish Line Carbon Assembly Gel Tube 50g
ID: 258325
£13.99
£ 27980,00 / 1 kg
Unfortunately the desired product is currently sold out
Product description
Finish Line Carbon Assembly Gel Tube 50g
Fibre Grip has been specially developed for the assembly of carbon components. Fibre Grip increases friction between carbon components, reducing the torque normally required to tighten, and is therefore ideal for mounting carbon seat posts, handlebars and stems.
Details
- For the assembly of carbon parts
- Seat posts, handlebars and stems made of carbon suitable
- Provides friction between the carbon parts for support
- Reduces the clamping pressure when mounted with clamps (gentle on the material)
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, BMX, Road, Cyclocross, Gravel, Aero, Endurance, Triathlon, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Assembly paste
Operating Range:
Frame, Telescopic seat post
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
Tube with 50 g content
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
258325
Manufacturer article number
F01750601
EAN
0036121610019
Customer opinions
Rohrnudel
Good paste
Translated from the German
To the original
I first thought expensive, but this paste does exactly what it should. My seatpost, which has always slipped so far, especially on journeys on gravel and in the terrain, now sits tightly in the pipe. I do not need much more power to tighten the quick release. All you need is a thin film in the clamping area. Thus, the paste is also economical to use and lasts very long. I have no carbon wheel but aluminum.
23.08.2013
cedepe
Economical and good
Translated from the German
To the original
The paste may not completely replace the torque wrench, but it makes the assembly of the carbone elements much easier. Even if it is in the manual, the tightening torque should be the same with paste, my experience is that less must be tightened and the parts sit nevertheless bomb-resistant.
18.02.2012