Product description
Park Tool TNS-1 Threadless Nut Setter
This mounting tool is used to install the mounting claws found in Aheadset and other threadless headsets. Screw the claw onto the TNS, slide it into the fork tube and drive it in with a hammer.
The insertion tool places the fastening claw 15 mm below the upper edge of the shaft tube. TNS-1 for 1 inch and 1-1/8 inch forks.
The insertion tool places the fastening claw 15 mm below the upper edge of the shaft tube. TNS-1 for 1 inch and 1-1/8 inch forks.
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Dirt, Road, Cyclocross, Gravel, Aero, Endurance, Triathlon, Trekking, Bike Travel, Bikepacking, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Cargo, Commuting, Dirt / BMX
The delivered product may have been produced earlier than the advertised model year.
Main Information
Tool Type:
Extraction / insertion tool
Operating Range:
fork
The delivered product may have been produced earlier than the advertised model year.
Model Year
2024
The delivered product may have been produced earlier than the advertised model year.
Article number
15056
Manufacturer article number
TNS-1
EAN
0763477008008
Customer opinions
René
Very good
Translated from the German
To the original
Do what it should. Four stars because unfortunately it is a bit expensive.
22.12.2017