Product description
Cyclus Tools Inserter for Ahead Clamp for 1" and 1 1/8" black (black)
This product’s description has been automatically translated. Please excuse any mistakes.
The Cyclus Tools impactor guarantees you exact insertion of the Ahead claw into the steerer tube with a previously defined impact depth. for Ahead claw 1" and 1 1/8".
Screw the required socket hand-tight (1" or 1 1/8") into the impactor. Now screw the claw to be mounted onto the threaded pin as far as it will go, using the cross hole. Place the tool on the steerer tube and tap it in with a hammer as far as it will go. Then remove the impactor from the steerer tube by turning the knurled screw to the left.
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
MTB Beginner / Tour, Marathon / Cross Country, All Mountain / Enduro, Downhill / Freeride, All-round / Beginner, Tour / Cross Country, Marathon / XC, All Mountain / Trail, Enduro, Road, Cyclocross, Gravel, Endurance, Trekking, Bike Travel, Cross, Every Day / Commuting, Lifestyle / Urban Biking, Everyday Cycling, Lifestyle / Single Speed, Urban Sports, Commuting
The delivered product may have been produced earlier than the advertised model year.
Main Information
Tool Type:
Extraction / insertion tool
Operating Range:
Headset
The delivered product may have been produced earlier than the advertised model year.
Scope of Delivery
Delivery:
1 x CYCLUS TOOLS impactor for 1" and 1 1/8" Ahead claw
The delivered product may have been produced earlier than the advertised model year.
Model Year
2023
The delivered product may have been produced earlier than the advertised model year.
Article number
1441911
Manufacturer article number
720088
EAN
8590831240390