TATZE MTB Link Pedals black

The LINK pedal is an extremely thin flat pedal. The large platform with 112cm2 (113x99mm/LxW) and 40 TATZE PINs with targeted superelevation provide enormous grip and a good connection between pedal and shoe. To further increase the grip or maximize the contact area, an additional 4 PINS per side can be screwed in. Unwanted ground contact avoids the LINK by its extremely thin design, so the pedal body at the exposed outer edge has only 8.8mm and thus the LINK is one of the thinnest pedals on the market.

The open design allows dirt to fall through the pedal and makes the pedal with only 343g lightweight. The LINK is high quality bearings, is built thereby an IGUS JSM plain bearing and 2 ball bearings. For sealing, 2 double lip seals are installed, which protect the bearings from dirt and moisture. The bearing and seal unit makes the pedal sustainable in terms of a long service life. In addition, the bearings and seals can be renewed in 5 minutes with the optionally available Refresh Kit to set the clock back to 0.