Lezyne CNC Gauge Drive HP Mini Pump M glossy black
ID: 392947
£42.99
- 12 %
Unfortunately the desired product is currently sold out
Product description
Lezyne CNC Gauge Drive HP Mini Pump M glossy black (glossy black)
Compact, lightweight mini pump with pressure gauge display. Cylinder, handle and piston made of CNC-machined aluminium, optimised for road bike use. Equipped with the ABS flex hose; an integrated pressure gauge compatible with Presta and Schrader valves. Including frame holder. Two colours: silver and black.
At a glance
Weight
112 g
Length
232 mm
Compatible Valves
Car valve, French valve, Dunlop valve
Pressure Gauge
yes
Maximal Pressure
8.3 bar
Features
The delivered product may have been produced earlier than the advertised model year.
Purpose
Road, Cyclocross, Gravel, Aero, Endurance
The delivered product may have been produced earlier than the advertised model year.
Main Information
Type:
Mini pump
Head:
ABS Pen Gauge Presta / Schrader valve cap
Compatible Valves:
Car valve, French valve, Dunlop valve
Maximal Pressure:
8.3 bar
Pressure Gauge:
yes
The delivered product may have been produced earlier than the advertised model year.
Material
Cylinder:
Aluminium
The delivered product may have been produced earlier than the advertised model year.
Dimensions
Weight:
112 g
Length:
232 mm
The delivered product may have been produced earlier than the advertised model year.
Model Year
2022
The delivered product may have been produced earlier than the advertised model year.
Article number
392947
Manufacturer article number
1-MP-GDHP-V1M04
EAN
4712805981960
Video
Customer opinions
Martin
Spontaneous loss of outer tube
Translated from the German
To the original
Actually a good pump. Small, light, handy and always been reliable. Spontaneous loss of the outer tube last week, making the pump unusable. Too bad.
Age: 3.5 years, used 99% on-road on the trekking bike
08.03.2023
maxchen
Addendum to rattle
Translated from the German
To the original
The disadvantage is that you don't have a stop when pumping, should you consider whether it's something for you? it doesn't bother me that much, but at high pressure it gets shaky, heavier, since the pump "floats in the air"
19.05.2022
maxchen
rattle rattle
Translated from the German
To the original
Pump output at 622/25 in the basement at 7 bar "at the end" reached, if you give EVERYTHING, 8 bar is also possible, it is important to press the jacket under "the rim" again outside if the pressure is sufficient. Definitely better than my old pump and I suspect the pump will make it. But the total no-go, the pump rattles, you can't believe it, it's not the hose inside, but the pump handle and "pipe" that rattles. I don't know if you can't solve this in any other way than now with insulating tape. A joke in the price range.
19.05.2022